34mm Split Clasp - Azeron Trackball Mod
Description
This was actually printed in an X1 Carbon. To complete this build, you will most importantly need a Teensy 2.0++,. PMW3360 optical sensor, (3) 3mm bearings, (2) M2.5 hex nuts, (2) M2.5 6mm screws (might need 8mm), & 34mm Trackball Please take a look at my GitHub site in order to create your own. I'm planning on testing options moving forward knowing that the teensy2pp is end of life.
Statistics
Likes
0
Downloads
0