Heltec V2 and V3 Meshtastic Lora case
Description
Heltec V2 (and probably V3 as well) Meshtastic LoRa device case. 18650 Li-Ion battery holder included. I recomend connect some high-gain antenna (some better and bigger than stock one what came with that board). Both buttons are working with this case (you can click buttons, there are holes-buttons for that). Indoor use only, it is not mentioned for outdoor usage (unless you will make it waterproof somehow). Printed with two colors for nicer look:) Small green dot next to power switch and logo are printed separately and glued in place. Switch used: 50V 0.5A SS12F15 Mini Size Black SPDT Slide Switch https://www.aliexpress.com/item/10000003088863.html?spm=a2g0o.order_list.order_list_main.161.793f1802AygBkO or https://www.aliexpress.com/item/4000042632226.html?spm=a2g0o.order_list.order_list_main.166.793f1802AygBkO Battery contacts used from 18650 battery holder: ABS 18650 Power Bank Cases 1X https://www.aliexpress.com/item/1005006348930637.html?spm=a2g0o.order_list.order_list_main.217.793f1802AygBkO BambuLab X1C 0.2 20 infill PLA+ no supports
Statistics
Likes
0
Downloads
0