Lone Wolf Display Book
Description
This is a follow-up remix to my Book+Drawers model at https://www.thingiverse.com/thing:6521768 - which is flexible and ideal for printing to go alongside your book collection. This model is an extension just to house some specific special items into the same case and style. It is designed to hold a custom D10 and Enamel Pin, and also house a battery box + LEDs if wanted, to make the display glow. I've made a variant of the plinth piece to house a slide switch to allow turning it on and off without opening the drawers, as seen in my pics. A few notes : - The D10 is a snug fit into the holder - warming the PLA will help you get it in place without damaging the die. - The slide switch is one I harvested straight from the battery box + LED string I used; it looks to be a somewhat standard size, but if yours is different, it should be easy enough to remodel the plinth piece in tinkercad (or whatever you prefer!) to recess in an appropriate hole. - There should be enough space to run wires to each of the places required. - If you use LEDs, make sure to include a current limiting resistor. Again I harvested mine from the same battery box + LED string. - The wolf motif with light up eyes has a space behind each eye for an LED. I made these a snug fit for the ones I had, but you may need to adjust them for size if your LEDs are different. Printing the inner motif in white makes the whole head shine, which is why the head and frame are separate. They will be a really tight fit, I've allowed about a 0.2mm gap for PLA. - Refer to the original model at https://www.thingiverse.com/thing:6521768 for the more complete notes. If you do print this, please follow up and post your picture as a 'make' - I'd really appreciate it!
Statistics
Likes
0
Downloads
0