IKEA Samla Tray Insert Wedge NG Parametric
Description
# IKEA SAMLA Tray Insert Wedge Parametric This is a parametric remix of [IKEA Samla Tray Insert Wedge NG](https://www.thingiverse.com/thing:3572388) by iggyggi. ## Summary of the original design > This is a minor upgrade to the "IKEA Samla Insert Wedge" by Dvogonen. > > Its basic purpose is to push the small ends of the Samla tray insert apart, to prevent it from slipping over the notches down into the Samla box. > > With the original design, I could not reliably get a double sided tape to stick onto the tray, so I designed a version with two 5mm holes. Use them as guides to drill holes of the same diameter into the tray and use either screws or a zip-tie to fasten the wedges in the tray. > > There is also a cutout to save some material. > > I printed in PLA with 2 perimeters and 10% infill. The part is mostly compressed from the side, so it should be sturdy enough. # GitHub https://github.com/nomike/ikea-samla-wedge-ng-parametric
Statistics
Likes
0
Downloads
2