Einhell BAS 18 (BAS18) PowerX Adapter
Description
Recently, both 18V NiCd batteries for my Einhell/Bavaria BAS 18 drill stopped working, despite the drill itself being in good condition for its age. Since I also own tools from the new Einhell PowerX Change Series (also 18V), I created an adapter based on the [Adapter Einhell Power X-Change](https://www.thingiverse.com/thing:2830821) by [bastelator](https://www.thingiverse.com/bastelator/designs). Unfortunately, the existing [Parkside x20 / PowerX to EINHELL 18v nicd](https://www.thingiverse.com/thing:4581834) adapter from [GLoL](https://www.thingiverse.com/glol/designs) didn't fit because my drill has a slightly different shape for the original battery packs (flat surface instead of an elevated surface). Please compare your machine to the images I and [GLoL](https://www.thingiverse.com/glol/designs) posted. Design: The upper part was created from scratch, while the lower part was a remix of the [Adapter Einhell Power X-Change](https://www.thingiverse.com/thing:2830821) by [bastelator](https://www.thingiverse.com/bastelator/designs). It is not meant to be removed after plugging it into the drill. Since the handle of my drill is broken, I can easily remove it. The connection to the drill is a simple single-sided copper PCB (leftover) with two M3 threads. One PCB is fixed on each side, requiring a total of four M3 countersunk screws (approximately 6 mm in length). The connection to the PowerX battery is achieved by two flat connectors (width: 6mm). Both parts are secured together with four M6 countersunk screws (16 mm in length) and four hex head nuts.
Statistics
Likes
0
Downloads
0