RSPB Bird Feeder Replacement Base Section
Description
RSPB Bird Feeder Base by AmuseboucheUK Design: FreeCAD Parametric I have designed this replacement base as the RSPB bird feeder base tabs break off. My final design has a base dia of 70, 20 high, the insert into the cage is 59.25 dia x 12 high with a 20 degree cone taper. The three tabs are 19 wide with two lugs 2 x 2 x 3.5 with 11 gap between the lugs. Material: PLA+ used (may need to use PETG if it is a hot summer, it's winter here at the moment so we will wait and see!) Infill: 10% Supports: Tree Touching Buildplate. Any feedback welcome All dimensions in mm
Statistics
Likes
0
Downloads
0