Printrbot Simple Metal - Printbed Upgrade
Description
Update **So I Finally Got Around To More Tweaking, Swapped Out The Power Supply For An Up-Cycled Atx Power Supply. Hooked Up The Power Switch, Voltage And Current Meters And Re-Did The Wiring Completely Which Neatened Things Up A Little. Hope You Guys Enjoy :) Update **I'Ve Modified The Swivel Feet To Allow The Printrbot To Tilt Onto Its Side. No More Need To Awkwardly Balance The Printer Upside Down In Order To Get To The Board.** Have A Look At My Project Page Here: Https://Hackaday.Io/Project/7083-Printrbot-Simple-Metal-Bed-Upgrade I Had The New Printbed Cut From 3Mm And 4Mm Aluminium And Tapped The Holes In The 3Mm Frame To Make Things Easier. The New Print Volume Is 270Mm × 205Mm × 140Mm The A3 Sized .Pdf Files Are Also Uploaded. As For The Parts To Be Printed, I Mostly Printed With 0.2Mm Layers And 15% Infill, 20% For Some Structural Parts. I'M Still Updating As I Go Along, The Parts Here Already Have Some Of The Errors Fixed. Enjoy
Statistics
Likes
51
Downloads
0