Bastad v2
Description
Wanted a small desktop case for a full size ATX motherboard, so i made one. Will fit mATX & ATX motherboards and have no problems with 900w psu. There is a space limit for GPU, 3fan cards will not fit. (I think 270mm is max lenth) Made place for 3pcs 3,5" harddrives. Two 120 fans in front and one in the back. There are room for Pwr,Rset,HDD/pwr-leds on the right side of front mesh, but you have to drill out the last layers out to use them. (I dont want any leds or buttons to show on my case.) Screw holes are “printed" m3, (top piece to bottom piece are m4.) (i used some wood screws i found in a box, it works as well) Print stl's marked with “mesh” flat and with no top/bottom layers, choose a nice looking infill. Mesh parts is glued in place, Only Front-Mesh is mounted with screws. All other parts, just get them printed with settings that works with your printer. Minimum print volume to not split parts is 334x313mm and 185mm high. Printed mine in PLA but ABS/PetG would be a better choise.
Statistics
Likes
0
Downloads
0