Ender 3 V3 SE Portal rigidity improvement
Description
A quick and cheap way to improve stiffness of your Ender 3 v3 SE portal. <h3> To assemple you will need: </h3> * Printed model * 2 x M3 screws (12 and 14mm) and 1 x M3 nut * doublesided adhesive, thermal glue, epoxy - up to you. * 3mm drill to make a hole in portal <h3> How to make: </h3> 1) Print a model 2) make sure its surfaces are flat and there are no print artifacts 3) remove right screw on the portal 4) tightteen a triangle thru a lower hole. 5) use upper hole on a triangle to mark a place for a second hole 6) drill the hole 7) unscrew triangle 8) degrease surfaces and apply adheasive, glue or whatever you have 9) setup the triangle moving from top 10) tighteen screws (12mm on top and 14mm lower one) All set =) Cheers! In case you wanna tip my work: https://www.buymeacoffee.com/Serhiok
Statistics
Likes
0
Downloads
0