Drill Press Centering Aid
Description
After Making And Using The Center Aid Tool By Connorus (Http://Www.Thingiverse.Com/Thing:725344) I Found My Drill Press Wasn'T Drilling In The Exact Center Of My Parts. I Needed The Holes To Be Precise So I Made A Version For My Drill Press. It Uses 1/4 Inch Bolts To Hold The Arms And Two 5/8 Bolts To Mount It To My Drill Press. The Mounting Holes Are 9 Inches Apart On Center Or You Can Use Whatever Clamps You Have. If This Is Different From Your Table I Included The Sketchup File So You Can Modify If Needed. To Center Simply Clamp The Bit With The Arms And Lock The Base In Place. I Made It With Puzzle Pieces So I Could Fit It On The Simple Metal. They Fit Tight And Need To Be Shaved Down To Fit Together. Even If You Have A Larger Printer And Can Print It In One Piece I Would Leave It The Way It Is So You Can Replace The Middle If You Ever Need To.
Statistics
Likes
26
Downloads
0