ADXL 345 Nozzle Mount - CR-6 SE/Max/CR-5 PRO Ender 3 Neo and V2 Neo
Description
Just a simple ADXL 345 Nozzle mount for the Creality CR6 SE and similar machines (machines with the same heat block). I did it because there are a lot of people that claim that it is better to have the ADXL 345 accelerometer nearest to the nozzle. It will clip to the heatblock only if you have the silicone sock in place. I use a third party silicone sock (see image) but the stock one should work. You are going to need: M3 heated inserts x2 M3 5mm screws x2 You can print it in any plastic, but please REMEMBER TO REMOVE IT BEFORE PRINTING. I gave enough space for it to do not interfere with the probing that the CR6 SE and similar printers perform with the nozzle, so it should not be a problem to put it before homing and doing the input shaper calibration. The .STEP has been provided so you can modify it to fit your needs. Happy printing!
Statistics
Likes
0
Downloads
3