WS2811 Jason Mask
Description
This is a prop for WS2811 LED lights. It holds 158 pixels. The tolerances are pretty tight at 0.2mm so make sure your printer is dialed in correctly. This has been split to fit on a standard Ender 3 bed. There are 4 bigger parts that will print on a slighty larger bed so those have been included as well. If you are printing on a 220x220 bed then use the "split" version of the files, otherwise just use the numbered version. I would recommend printing this out of PETG or ABS to make sure it holds up to outdoor temps. I would not recommend using PLA. I have included the xlights xmodel in the download.
Statistics
Likes
0
Downloads
0