Underwater ROV parts
Description
These parts were prepared for the Utah ROV competition. I've included a Motor Mount and the Hydraulic Claw files. I used two 20ml syringes for the pistons and 1/4" poly tubing with automotive clamps as the hose. The motor mount works best at 102.3%. I also included a jig to drill pilot holes in the propellers. I had to cut notches in the sides after printing it. The claw and other parts are connected with 1/8" cotter pins. The front hooks are made with 14 gauge galvanized steel wire.
Statistics
Likes
0
Downloads
0