DJCrawler 1.3 / 1.33 inch tires adapter ring for WPL beadlock metal wheels
Description
This adapter ring lets you mount a DJCrawler 1.3/1.33 inch tires on the commonly found WPL/MN metal beadlock wheels (with the WPL V1 67mm tire) with a 37mm face diameter Tested on the "Canyon" 64x24 DJ-1125, may also fit the "Recon" 58x24 DJ-1126. The Injora 1.3" are of a different, smaller dimensions and will probably not work. Not sure what the manufactures size are based off.. The basic v4 ring is tested and working but gives a narrower wheel look, v5 with the channel is untested, ring is vented unlike the original steel ring. The extended 15mm rings are still WIP and untested, I'm just using Tinkercad and I'm not entirely sure I have modeled the pattern correctly. Middle hex section will surely won't print correctly. There's also a 1mm channel around the ring to let you wrap solder for added weight. The extended version also correct the offset of the MN78/82 axles, the front is +1mm (prevents rubbing) and the rear +2.5mm so that both front and back are of the same length. It will need longer M2 10mm hex screws to assemble
Statistics
Likes
0
Downloads
0