G&G G2/G2H Gearbox Parts
Description
A compilation of various G&G G2 and G2H compatible parts that I've modeled while teching. Most of the parts will work with both G2 and G2H gearboxes. Most of the parts are very close to the original but it may be necessary to post-process some of them. Included are all the selector parts for the G2/G2H boxes except the keyed selector transmisson pin.(which should be made from a 3mm pin) The selector parts are supplementary for the most part, I wouldn't recommend swapping all your OEM parts for these without reason. The HPA spring guide is a drop in replacement for the original spring guide if you're installing a cylinder-type HPA engine. It shouldn't rattle around and fall out like the original spring guide since it is designed for the absence of a spring to hold it into the back of the shell. The spring guide spacers are shaped to the OEM G&G spring guide for use with an AEG setup to add tension to your spring. They come in various sizes to produce differing FPS changes. Though it isn't for the gearbox, there are two versions of the barrel brace which is made for slotting into the front of the URX 4 to hold the barrel centered under the weight of a suppressor. It is made for an SR-25 and may fit SR-15/SR-30s, but I have not had a chance to test it. If you have questions feel free to message me.
Statistics
Likes
0
Downloads
0