Water pump leg (pump from Aliexpress)
Description
I made this waterpump leg for the pump i bought from Aliexpress. This pump is handy for cabins etc but i forgot to order the leg. This was my way to do it. It fits snug on the pump but ofcourse it depends on the material you use and setting. I did this from pla. I suggest you to lay this design on slicer so you can print only the upper ring to testfit it to the pump first. If it is ok then print the whole leg or scale it to fit. In my case i designed it to fit just perfectly.
Statistics
Likes
0
Downloads
0