Spiral Sphere Planter
Description
This is a planter pot I designed for a little design sprint exercise. No Supports should be needed. Materials needed are as follows: 4 Inch Pot: 8X 3inch by .25inch Wood Dowel 6 Inch Pot: 8X 4.5inch by .375inch Wood Dowel 8 Inch Pot 8X 6 inch by .5 inch Wood Dowel I used white PETG Filament and finished the wood rods by lightly burning the surface, then sanding, then putting a matte lacquer on. (See shou-sugi-ban)
Statistics
Likes
1
Downloads
0