Arcanazen's Legion Go Custom Backplate
Description
This is my take on the Lenovo Legion Go backplate created by whisperit. I added a smaller grill so it looks closer to the stock grill, also the ssd area comes with holes (2230/2242/2260/2280) to securely attach your ssd using a standard screw for nvme. Only single sided SSD are recommended because a double side could bend/melt backplate (unless you use a very high heat resistance filament). Finally the ssd cover has 2 holes for M3x5mm screws to protect the ssd even more. You will need M2x3x3.5mm brass inserts and also soldering iron with small tip (small enough to hold the inserts) or a 3d pen (or you can use something else to hold insets while you heat them up to melt the parts) to assemble the stock hinge with the kickstand. You can buy them from here: https://www.amazon.com/dp/B0B8GN63S2
Statistics
Likes
0
Downloads
1