Numberblocks Magic Mirror ! Plus space helmets and rocket attachment
Description
My kid loves numberblocks, I'm sure yours do too. I made a bunch of numberblocks toys and just wanted to share them! Made to the scale of the toys they sell for the smaller ones, check my other creations for the rest of the collection. Enjoy! This one is a lot of fun. The magic mirror, plus a spinning cube, AND the rocket attachment 1 uses to fly to space. Also my kid wanted some space helmets for them so there is a special helmet for 1, plus the regular helmet that will fit all the single wide block figures from the toys they sell. For the helmets you can also print the shield which just snaps on, I printed that with the top edge down on the build plate and at an angle that didn't require any additional supports. There are places to put magnets on the back of the mirror and the mirror mount on the rocket so that it can be detached. To make a spinning cube, print the cube pivots, snip them off clean. drill out the hole in the cube (print that so the hole is vertical, shouldn't need much support). Glue one pivot down in the mirror, mount the cube in place, and slide the second pivot down through the top until it is flush. Then glue that in place only at the top of the mirror.
Statistics
Likes
0
Downloads
0