FPV Tiny Whoop Gate Connectors for EN16 Insulating Tubes
Description
<b>FPV Tiny Whoop Gate Connectors for Insulating Tubes (rigid EN 16, length 2 m)</b> The tubes have an outer diameter of 16mm and an inner diameter of approximately 13mm. Only 1,09€ at the German hardware store OBI: https://www.obi.de/p/7550189/isolierrohr-starr-en-16-laenge-2-m From one insulating tube you can create three 24" (61cm) pieces. For the official RaceGow (https://www.racegow.com) tracks you will need 20x 24" pieces so you will need to buy 7 insulating tubes (7,63€ at OBI). For RaceGow you will need a total of 16 connectors: - 4x 2way_1 - 6x 3way_1 - 2x 4way_1 - 4x 5way All connectors except the 6way connector can be printed without supports. There are two sizes, 13.2mm is a tight fit for flexible TPU prints and 13.0mm is a loose fit for hard filaments.
Statistics
Likes
0
Downloads
0