E-revo 1/8 Wing Drill Jig
Description
Drill jig to easily adapt generic 1/8 wings for the E-revo, E-revo 2.0, and Revo TRX 2.5/3/3 models. Use 8mm or 5/16 drill bit, and the original wing mount screws to mount the wing (m4x16 hardware) "wing brace" replaces the stock plastic spacers that prevent the screw heads from scraping For best results, print the wing brace with nylon, CF nylon, or ABS, but PLA should work just fine.
Statistics
Likes
0
Downloads
0