Steno Keyboard with Raspberry Pi Pico
Description
Inspired by the nolltronics picoSteno. They have a great guide on how to flash the firmware necessary. For this build, I used Cherry Mx3 keys and a raspberry pi pico. I pre-soldered the 26awg wire to the keys and fed them through the holes. The base is in two separate files because it wouldnt fit full scale. The key caps are from tiny steno board 2 and work great. The firmware from nolltronics is compatible with PLOVER. "https://github.com/nkotech/Picosteno-Firmware" As of now, the long number bar doesnt press down all the way as it is too big around the keys. Working on a fix for that.
Statistics
Likes
0
Downloads
0