Tetris Puzzle Cube

Description

A puzzle with tetris-like L-shape, T-shape or Z-shape blocks that makes a 6x6x6cm cube 54 blocks pieces needed *All shapes can also be used as a simplbe building blocks to play with* **Print a Box, Half-box and 54 blocks** You can choose between **T-shape** , **L-shape** or **Z-shape** blocks You can even mix them together. I'm 100% sure you can mix 18 of T or L shape and 36 of the L or T. Maybe 50/50 will work too. I couldn't find a solution with few solid layers of Z-shape blocks tho There is even more possibilities. The best may be printing set of each blocks and then trying to make a cube with different numbers of each shape --- Solution for all 3 block types https://youtu.be/Wi4jzm-eWWw Some more videos: https://www.instagram.com/reel/C2z5tKUN0zU/ https://www.instagram.com/reel/C2z9eitNNDD/ --- The puzzle is with a box made of two parts **Half-box** is on where you build a cube **Box** is with some cutouts to fit a half-box there. Will be easier to hold it in hands or on the table and blocks should not fall that easly When box is assembled the cutouts should be where the solid walls of half-box are to make sure that no block will fall out Store it upside-down (so on the box, not on the half-box). Flip it (holding the other side) before taking blocks out You can also print a **Stand** wich may be easier to use than two parts version, but you can't make a box out of it I may try to make a lid for it if someone will need it You can choose between tetris-like shapes (made of ‘sepparate’ cubes) or smooth shapes (on photos) --- **Assembling Tips:** Don't look at solution video or photos before you try to solve it by yourself first If you will struggle for too long read the tips below If it will still be too hard you can check photos or videos then You can make a solid 2 layer block on both L-shapes and T-shapes, so then you just need to copy that to 4 of the rest layers It should be possible on both shapes to make a solid 3 layers blocks too **L-shapes** (easiest to assemble) For easiest solution on each layer there should be one empty square and one that goes to next or previous layer On photos and video you will see solid 3 layers solution **T-shapes** (medium difficulty) Easy solution: On each layer there should be two empty squares (not on corners) and 2 that goes up or down (both in the same way). Two layers will make a solid block **Z-shapes** (hard difficulty) Couldn't find an easy solution (with few solid layers or with some good, easy patterns) On photos (and on video soon) there is one solution that I came out with --- You can sell prints of this models The only thing you need is to add an information where you get the files from (link to this page on Cults3D) You cannot remix this model ---

Statistics

Category

Tags