Chitu Systems Mini Heater mount
Description
Needed a stand for Chitu Systems Mini heater that can be attached to resin printer enclosure. Two models: Heater_Stand_Normal. The heater is easy to set in the pocket, loose fit. Heater_Stand_Snap_In. The heater has to be pressed in, quite tight fit. I attached this with 3M VHB 5952 double sided tape, diameter 35mm. So far holding well. Heater: https://www.aliexpress.com/item/1005006446759242.html Printed on layer height: 0.2mm
Statistics
Likes
0
Downloads
0