Resin Printer Tool Organizer
Description
Printed in two halves so it would fit on my print bed. I glued them together (completely unnecessary) then used four wood screws to mount it to the wall over my workbench. The left-most "tool" is the turntable for an Elegoo Mercury Plus washing and curing station. A super magnet holds it in place. The .3mf and .bgcode files include a pause at layer 27 (5.4 mm) so you can install a 12x6x3 mm magnet. I discovered that two semicircle shapes work GREAT for holding certain tools like: tweezers, pliers and flush-cutters. Hanging the tweezers is particularly satisfying. The curved walls automatically compress the tweezers as you push them in, and friction holds them in place. You basically just "stab" them in. The only difference between the pliers and flush-cutter holders is the separation between the semicircles. The flush-cutter mounts are a little farther apart. The big scraper's hook is reinforced with a steel nail. After the print is complete just push in a 1" x 17 wire nail (1/5 mm dia. by 25.4 mm long) from the back. There is a countersink for the nail head so the organizer will sit flush against the wall. There is a sacrificial layer at 1.4 mm (the top of the nail's countersink) to support the bottom of the nail's tube. Just push your nail right through it. If you'd like to know more about this idea of using a nail to reinforce a peg, visit https://www.thingiverse.com/thing:6543637 #### Note PrusaSlicer will show errors for both .stl files. Don't fix them! If you do, the slicer will fill-in the magnet's cavity on the left side and the nail's tube on the right side.
Statistics
Likes
0
Downloads
5