Artillery Sidewinder X2 - Ikea RÄCKA Curtain Rods Gantry Support Brace
Description
i made this support brace that use two 70cm curtain rods from ikea: https://www.ikea.com/gb/en/p/raecka-curtain-rod-black-00217165/ You will also need 2 screws M5x10mm, 2 screws M6x30mm, and 2 M6 nuts. you can order from here: https://s.click.aliexpress.com/e/_Dl8qB9T 1. install the bottom brackets by re-using the M5 screws already on the machine, the "bottom-right" bracket goes to where the power switch is located: <img src="https://cdn.thingiverse.com/assets/69/c7/9c/7f/28/large_display_caf667fa-e17f-4fb5-8279-bb428878a8e5.png" width="640"></img> 2. insert an M6 nut in the NUT-Plug. <img src="https://cdn.thingiverse.com/assets/97/ad/76/a4/77/large_display_9e43c7aa-d8ab-4f40-b65d-8c498113728b.png" width="640"></img> 3. insert the curtain rods to the bottom brackets and the NUT-Plug to the top side of the rod. <img src="https://cdn.thingiverse.com/assets/0d/fb/3e/85/74/large_display_2b47a6d8-5090-4e4f-8865-2472f0a33812.png" width="640"></img> 4. the 2 screws that goes into the extrusion will have to be replaced by M5x10mm screws. <img src="https://cdn.thingiverse.com/assets/b6/3d/c8/4b/17/large_display_58cc9a00-e02a-4469-8c09-04224e8d9698.png" width="640"></img> 5. insert an M6x30mm screw to the nut, this screw is for adjustment, if you have a problem with your gantry not being 90 degree to the base you can use this screw to pull or push the gantry, i use a digital level to check for the angle of the gantry, it only works with the Screw-Cover. <img src="https://cdn.thingiverse.com/assets/b9/0e/5b/e7/d4/large_display_e1cbb6ee-9106-44f1-af41-a0f312d9e88d.png" width="640"></img> 6. Use 2 M5x40mm screws and nuts to fasten the Screw-Cover, this part is for holding the adjustment screw in place: <img src="https://cdn.thingiverse.com/assets/74/98/d0/18/87/large_display_8ad09d4c-cfa7-4980-98f4-abc0961247eb.png" width="640"></img> you can attach the brace with 2 m3 screws on the bottom of the printer but i found that it is not needed and will only make it harder to open the bottom cover. <a href="https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=52VBFE8T4PV5C"/>Buy me a coffee: </br><img src="https://qph.fs.quoracdn.net/main-qimg-7feb81f45db5bd355683bc19b3c7ee00.webp"/></a>
Statistics
Likes
0
Downloads
0