SATSANA 5015 4020/10 CRT ENDER 3/V2+ BY HECBEN
Description
This is the remix of the remix of the remix of the remix… of the original SATSANA. It is designed for mounting a 4020/4010 heatsink and 5015 layer fan. The remixes I based this on had design flaws that prevented a reliable fixation of the 5015, so I added an edge to the air inlet to match the fan’s outlet for better airflow. On the other hand, the printed mounts for the CR Touch probe (original) in other remixes were not very reliable in terms of position/angle and also required additional nuts, so I adapted the SATSANA design to integrate with the original probe mount, using the screws to secure both the SATSANA and the probe mount at the same time. The necessary screws are the same. Finally, I added some tabs to be able to place covers on the heatsink part, I will soon update this post to add some design. It does not interfere with the operation, it is aesthetic (although it also prevents touching the blades). Followme and watch https://cults3d.com/es/usuarios/hecben/modelos-3d
Statistics
Likes
1
Downloads
1