Nespresso Coffee Pod Organizer
Description
Cura Settings Layer Height .2mm Walls 4 @ .8mm Top/Bottom 4 per @ .8mm Infill 20% Cubic Subdivision Temp 206 C / 60 C Speed 60mm/s with Initial layer @ 10mm/s Retraction 6.5mm @ 25mm/s Cooling 100% @ Layer 4 Supports: Yes Supports are a pain to remove I used the flat scraper and the 400 grit sandpaper wrapped around a credit card once I got the supports out to smooth the slots allowing the pods to slide smoothly.
Statistics
Likes
0
Downloads
0