Creality CR6-SE Motherboard Cover / 92mm Fan Adapter
Description
This motherboard cover is designed around fitting a Noctua NF-A9x14 in to my CR6 without raisers or changing the outer shape. This should accomodate any 92mm fan 14mm thick, and presumably also fans 15mm thick (untested) - if it doesn't conflict with the mount for the buck converter. There are 4 variations, countersunk or flat, and self tapping or inserts. The flat variations still have countersinking for the 4 fan screw holes. The pictures I've added are for the countersunk with inserts variation, To install a 12V fan in the CR6 you will need to use a DC-DC step down/buck converter, as the CR6 fan headers provide 24V. This cover includes a bracket to mount the commonly found converters with M2.5 screws, using the insert or self tapping variations. I found it easiest to cut up the spare adapter that came with the fan, and solder (& glue) this to the converter to make un/install easier. *Recommended parts* - 2x Countersunk M3*6 screws - 1x Countersunk M3*12 screws - 2x M2.5*4*3.5 brass inserts - 2x M2.5*6 screws I found this printed fine without supports using layer height of 0.2mm or less. Wall count can be important to set appropriately. Good dimensional accuracy settings are likely important. I would suggest a variation of PLA over PETG, as I found my PETG prints to be too flexible. Original design, but insprired by https://www.thingiverse.com/thing:4716529
Statistics
Likes
0
Downloads
0