Pro10 / Pancar body reinforcement
Description
If you are liking this design : thank you for sending me a donation :-) Here you will find Zip file containing an STL file and some pictures to print two part to get a reinforcement for your pro10 / pancar body The part with a small dot have an angle of 40° from horizontal The part with a big dot have an angle of 50° from horizontal Once printed, you will have to drill both holes to 1,5 mm diameter. For assembly you need a carbon rod (1,5mm) cut to desired lengh. Final assembly can be done with glue (best results with Shoegoo) Print in place (no support needed)
Statistics
Likes
0
Downloads
0