Fuji (Fujifilm) X-H2, X-H3 Base with Arca-Swiss
Description
The Fuji X-H2 and H2S are great cameras. This new grip expansion provides full support for rapid mount Arca-Swiss tripods, yet doesn't block access to any camera features, such as battery, display etc. In case you DO want to use a conventional screw-type mount, I've incorporated a hole in the bottom into which you can heat-insert (with a soldering iron) a standard ¼-20 threaded insert. The photo shows the insert in place. A suitable heat insert can be bought from here: https://www.amazon.com/dp/B08VGTS2D5 You will need a ¼-20 x 3/8" slotted head (or Philips) screw to attach this grip to your camera. Alternatively you can use this specialty screw, no tool required (shown in the photos): https://www.amazon.com/dp/B00KI3J7G2 Printing is easy, 20% infill is fine. I used black PLA but it's up to you. Yes, there are metal units out there to be bought, but I find them heavy and cold to the touch. One note, you won't need to use supports – there's are designed-in easy break-away supports on the bottom. Once it's printed, simply break them off with a pair of needle nose pliers. Two versions are provided, one with a safety-strap attach point, one without. There are also recesses for optional rubber pads for the bottom. You can purchase rubber grip material: https://www.amazon.com/dp/B0CM5PB8Q9 If anyone wants one made for you, I will provide a ready-to-use unit with the 3d printed base, threaded insert, laser-cut textured rubber pads and special screw for $10 plus postage. Just message me through this site. This is NOT a money-making endeavor, just covering my costs (If Prusa wants me to pull this offer, I will.) Enjoy, let me know how it works for you!
Statistics
Likes
0
Downloads
0