USB Shifter Sequential Mod Clip
Description
This is a clip or replacement clip for the USB H-Shifter that enables the shifter to operate as a sequential shifter. The unit I bought off Amazon is the Aikeec USB Shifter 7 + R which came with the sequential shifter clip but this should even work for the 6 gear version (I think). The problem I have with the original clip that came with the unit is that it requires a tiny nut and bolt to be used to secure it in place and that it slowly works itself up the shifter shaft. I designed a replacement clip that doesn't require anything to secure it in place and won't ride up the shifter shaft. To install the replacement clip, pull the magnets out of the stock clip, insert them into the redesigned clip, and then install the clip onto the shifter in the sequence pictured from 1 to 3. Removal is the reverse of the installation. I printed it on it's side with the open side up without supports like how pictured in Cura but you can use supports if you want. If you don't have the original clip and need magnets, the magnet that came with the clip I modeled the design around measures 3.9mm x 7.5mm.
Statistics
Likes
0
Downloads
0