Mostly Printed CNC X And Y Endstop Plate
Description
This Is A Holder For Common Microswitches For X And Y At The Same Time. The Switches I Used Are Made By Marquardt But There Should Be Plenty With The Same Dimensions From Other Manufacturers. As A Trigger Pin I Used An M3 Bolt On One Roller F And The Long Lever Of The Other Bent To Shape For The Other. Attach The Switches With 3 M3 Bolts To The Plate And Use 2 M4X35Mm Instead Of The Regular 2 M4X 20 To Lock The Corner Block. Pretty Simple And Stable.
Statistics
Likes
15
Downloads
0