Fridge display cover
Description
I often accidentally change the temperature settings of the fridge while leaning over it in the car so I decided to do something about it ! The fridge I designed this for is the BougeRv 35L car fridge, I suspect it will fit other models that use the same body design as well. It was scanned with my revopoint Miraco 3d scanner and then modeled around that so the fit should be pretty spot on. I only ever change the settings of this fridge via bluetooth so the buttons arent needed for me. I did however include a version that has button cutouts, you should be able to fit a small finger in to activate the buttons if needed. The cover has two sections that are slightly recesed to fit some double sided tape. The recess should just be enough for the tape to still grip while keeping the profile as flat as possible. You may need to adjust this recess depending on the tape you use. I used some gorrilla outdoor tape. If you test this on another fridge please leave a make and comment to let me know if it fits that model!
Statistics
Likes
0
Downloads
1