Airspeed indicator for flight simulator
Description
This is a replica of an airspeed indicator. It is inspired by the airspeed indicator you can find in fighter jets but is not an exact replica. The speed range is adapted to the planes I usually fly in DCS World. It is designed to be used with a NEMA 17 stepper motor (like this one : https://amzn.eu/d/48ZMKHg) and with a digital sensor (like these : https://amzn.eu/d/fukfElb). The PDF is the background to be printed and glued to the front plane. I will use it connected to a stepper driver shield for an Arduino Uno. I plan on using it for DCS World through the use of DCS Bios. To assemble the different parts you will need 5 M3 screws for the stepper motor (M3x5mm) and the digital sensor, 4 M3 screws (M3x20 mm) and four nuts (M3) to attach the front plane to the motor support
Statistics
Likes
0
Downloads
0