Binocular Solar Filter DIY Kit 60mm / Solar Eclipse
Description
Binocular Solar Filter DIY Kit 60mm Filter case inner diameter is 60mm. It is a set for you to prepare solar filters for smaller binoculars. Print stl files and you need for 6pc m4x10mm bolts and should only have a solar filter. If you want print the m4 bolt case (print_with_tpu).stl file with tpu in the zip file. It will be attached to the end of the bolt to prevent damage to the binocular. You need to make two of this print. Because for two objektive of your binocular. I can make different sizes for your telescope, camera lens and binoculars. Different versions are available in my other listings. You can choose the appropriate version according to the objective diameter of the binoculars. Glue the solar film you will use between two filter rings. Then glue it to the main body. Be careful to stick it sufficiently with a strong adhesive. if you want to support https://www.etsy.com/listing/1689678882/binocular-solar-filter-diy-kit-60mm
Statistics
Likes
0
Downloads
0