Seltzer Koozie / Coozy with air gap (for Truly, White Claw, etc)
Description
This is a coozy designed for the tall, skinny cans that are most commonly found in seltzers like White Claw and Truly (both have been used for testing). The base part has two walls and an air gap in between, inspired by the vacuum insulated metal coozys that are available for standard beer cans. Obviously we can't draw a vacuum in the 3d printed part, but based on my testing this still provides acceptable insulation. The lid should be printed with the lip facing down to avoid the overhangs at the transition where the threads end. It can be screwed on and off the base in order to insert and remove the can.
Statistics
Likes
0
Downloads
0