Dumbbell
Description
I took the screw section and sliced off the handle, replacing it with a tube for the handle and copy/pasted the screw end to make a Dumbbell. 95mm handle spacing which is enough for me and as a whole is just enough space to print upright on a Ender 3 v2 72mm screw length - my weights are a little over 52mm thick which with the nut leaves about 2mm left Note: I have yet to test print and test this (will do that tomorrow or so with petg as printing something else atm) - I have used the kettlebell with 7.5kg and it has handled that extremely well, also it's over a year old (still going strong as used Creality pla) I don't have any small sized weights and have been using weights meant for a Bench press which are oversized for the Kettlebell but it fits and will be the same for this Dumbbell. The Kettlebells handle is a tad small for me but still does the job, I wanted to see what a Dumbbell could handle and also petg been slightly stronger it seems like a good idea. Here's the link for the Kettlebell; https://www.thingiverse.com/thing:2086852 P.s The person that made the Kettlebell - Thank you.
Statistics
Likes
0
Downloads
0