Macintosh SE PDS mount for BlueSCSI V2 (50 pin, Desktop)
Description
This is a modification of the stock BlueSCSI bracket to allow mounting in the Macintosh SE's case at the PDS slot with two 800K floppy drives installed. In Prusa, paint supports in the large opening to ensure proper printing. Depending on your IDC cable you may or may not have to modify this model for proper spacing out of the back of the case. You will almost certainly have to fold your IDC cable, so be careful! The PDS cover will no longer fit with the BlueSCSI mounted in this location. If you wanted to fit it back on you'd need a very slim IDC cable and I don't know if those exist. I may design a cover that will let the BlueSCSI poke out of the back of the case but still be slightly protected. I also left a small cutout to fit a spudger under in case you print this in ABS, like I did, and use glue to affix your parts to the bed.
Statistics
Likes
0
Downloads
0