Tiny Whoop Carrying Case
Description
Fits 65mm tiny whoops. Designed around the WebleedFPV Crown frame with a Mobula canopy. Also fits the meteor65 frame and will likely fit other similar frame/canopy combos. If it fits your build post it in the comments to help others. The battery holder is designed around the GNB 380mah packs but will probably hold the standard 300mah stick batteries as well. If not, let me know and I'll make a top for the 300mah packs since I know that's what most people use. There's also plenty of room to carry loose packs with the plain lid too. Requires 2x 5/16" x 5/64" (8mm x 2mm) magnets for the closure (harbor freight if you're in the US) and 45mm of 1/16" (2.40mm) od aluminum tube or similar for the hinge pin. I left a tiny bit of room so that the case doesn't squeeze the frame and warp it, so glue a small piece of soft foam into the middle of the lid to take up the slack if a slight rattle bothers you.
Statistics
Likes
0
Downloads
0