RPi 4 DigiAMP case
Description
A simple case for a RPi4 with the DigiAmp hat. The case has place for a 30mm fan, as you might want to keep it cool. Screws are pocketed, not sticking out underneath the case. 2mm wall thickness. I broke the case with 1,5mm wall thickness when removing the hole supports. Assembly order 1 - install the fan 2 - place the DS card in your RPi and place it in the base. Without hat! 3 - screw the RPi to the bottom with the spacers 4 - place the DigiAmp hat audio connectors through the holes, then pressing it on the RPi GIO header and screw it on the spacers 5 - click on the lid
Statistics
Likes
0
Downloads
0