SGI Octane XIO Blank
Description
Blank panel for SGI XIO boards as found in Octane workstations. It's probably a good idea to print the panel (and baffle if putting two blanks side-by-side) out of PETG to avoid the potential for a warm system making things droopy, but the fronts are probably fine in standard PLA. The front is designed to be held in place by two M3 screws in the wider spaced pair of holes, an original steel front _can_ be fixed to the lower holes with #6 self-tapping screws, but there's not much support, so go easy.
Statistics
Likes
0
Downloads
0