Filament Roller (adjustable)
Description
Hello fellows, This is my remix of: @heinz_403204's "Verstellbarer Rollenhalter" https://www.printables.com/de/model/819197-verstellbarer-rollenhalter My goal was to get rid of using screws and the usage of supports cause no one likes that ;) I heavily redesigned the following: - bottom unit: no supports needed due to 45° dovetail-like guide - side panels: no screws needed anymore due to a press fitting between the 608 bearings You will need to print "side_panel_V3.stl" 4 times. The bottom unit is currently designed to fit a maximum spool thickness of 70cm. Perhaps I will upload some files for bigger spool sizes later. I've included two different bottom unit files: - "bottom_unit_V3.2_lose_fit.stl" -> side pieces can easily be moved back and forth (Recommend !) - "bottom_unit_V3_tight_fit.stl" -> you will need a lot of force to move anything Additionally, you will need some generic 608 bearings. If you have any further questions let me know it in the comments. Happy printing!
Statistics
Likes
0
Downloads
0