Creality K1 Max filament sensor on the right side
Description
Not finding any model for the K1 max on the web I was inspired by several models for the K1, K1C. You will need 2 x M3x8mm or M3x10mm screws to attach the plathan in the top right corner of the machine. The sensor uses the original screws. PS: I used a 6mm drill bit to enlarge the hole on the back of the machine to run the sensor cable. Printed with Creality Hyper PLA. Orca slicer with stock Hyper pla profil
Statistics
Likes
0
Downloads
1