Nozzle Cleaner Sidewinder X2 if you have bed tension mod
Description
When you have belt tensioner mod you have smaller y axis like 307,5 and original fit only when without belt tensioner mod 313 What changed?: Shorter by 6mm and now brush is almost near bed plate and its compatitible with bed ternsion mod. Print with petg due high temp near bed! MY GCODE: G28 ; home all axes G90 G1 X60 Y307 F4000 ; #change value 307 if diffrent maximum y bed G1 Z1 F1000 ; #change if you have nozzle on diffrent high G1 X10 F25000 G1 X60 F25000 G1 X10 F25000 G1 X60 F25000 G1 X10 F25000 G1 X60 F25000 G1 X10 F25000 G1 E-2 F1800 M420 S1 M117 Purge extruder G92 E0 ; reset extruder G1 Z1.0 F3000 ; move z up little to prevent scratching of surface G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position G1 X2 Y200.0 Z0.3 F1500.0 E15 ; draw 1st line G1 X2 Y200.0 Z0.4 F5000.0 ; move to side a little G1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line G92 E0 ; reset extruder G1 Z1.0 F3000 ; move z up little to prevent scratching of surface
Statistics
Likes
0
Downloads
0