pikvm cheap readymade parts
Description
## pikvm cheap readymade parts Is nice OpenSource Project: [https://pikvm.org/](https://pikvm.org/) I use the PIKVM with a webcam pointed at the screen because I only use it to check if there is a problem and to start my pc. Webcam is cheap works without hdmi problems and is only to see the bios oder restart parsec or xrdp. ## print I have printed it without support, but it may be that you have to rework the two housing screws that connect the top and bottom with a small drill bit. Fusion file might be a good start for someone else. ## build case - pla - 9 * M2,5 is 8mm long srew - 2 * M2,5 is 16mm long srew - 11 * M2,5 nut - 2-Relais Modul 5V with Optokoppler Low-Level-Trigger (Srew 45mm * 33.8mm ) - USB-C/PWR Splitter [made by 8086](https://www.tindie.com/products/8086net/usb-cpwr-splitter/) ## Config File Relay stats are unfortunately inverted for this reason i had to create my own buttons in the config. ``nano /etc/kvmd/override.yaml`` [pikvm doku to gpio](https://docs.pikvm.org/gpio/) ```yaml kvmd: gpio: scheme: # Two outputs of RPi's GPIO button1: pin: 21 # GPIO pin number on the RPi mode: output switch: false inverted : true button2: pin: 20 # GPIO pin number on the RPi mode: output switch: false inverted : true view: header: title: Invert Start Buttons # The menu title table: # The menu items are rendered in the form of a table of text labels and controls - ["#Generic GPIO"] # Text starting with the sharp symbol will be a label - [] # creates a horizontal separator and starts a new table - ["#Start GPIO 21:", button1] # Text label, one input, one button with text "Click" - ["#Reset GPIO 20", button2] ```
Statistics
Likes
0
Downloads
1