TRX6 Dually Adapter
Description
This is an adapter I made to use dual wheels on my TRX6. They work very well, allows a (approx) 3mm gap between the wheels I used. Wheels/rims are INJORA 1.9 bead locks. I would think it should work on other brands. You need to buy 4mm thread x 6mm HEX spacer standoffs. I used 50mm long and cut to the right length and re tapped the end I cut off. It needs to be flush on each end and then used a 4mm button head screw to attach the outer tire/rim. I used blue loctite for insurance at both the axle and button head screw. I have also included the un-merged version to allow you to modify as needed for your application.
Statistics
Likes
0
Downloads
0