Raiser for K1/K1C (not K1 Max): LOW PROFILE
Description
Raiser for the Creality K1/K1C with low profile to use with the stock/cyclops extruder, not orbital or Bondtech extruder, looking like K1Max You need to cut and order a 5mm acryclic with 321*321 mm aprox size and you need also a window gasket to seal the cover. You can find or use any handle that you like. Also you need small magnets to hold the covers in place. You have the plain cover if you wish to create any remix.
Statistics
Likes
0
Downloads
0