G103c Twin III Acro
Description
This is a *static model* of the Grob G103c Twin III, unarguably the best training glider ever designed and built. The model comes in a ready to use bluid plate. If the outer wing parts are too difficult to print straight up, it might be a good idea to print it flat. Printed just fine on my Ender 3 with 0.16mm PLA layers, after a slicing done with PusaSlicer. No raft or brim used, these would probably be a pain to remove ^^ You may also want to check my full collection: [ASK-13](https://www.thingiverse.com/thing:4840767), my [Br905 Fauvette](https://www.thingiverse.com/thing:5166426), my [JS3](https://www.thingiverse.com/thing:5138871), [Janus C](https://www.thingiverse.com/thing:4824557), [Libelle H205](https://www.thingiverse.com/thing:5419202), [Horten IVa](https://www.thingiverse.com/thing:6230518) and my [Ka6e](https://www.thingiverse.com/thing:4948591). *Finishing* - Basic finishing can be done with just acrylic paint applied with a brush or even using a felt pen. - For a pro finish I use the following: - Rough sanding of the model - Apply UV resistant epoxy resin witha brush - Fine grain sanding - Acrylic paint applied with airbrush - Clear acrylic coating applied with airbrush ----------------------------------------------------------------- If you like that model please consider making a small donation to the "[Cartable & Sparadrap](https://cartablesparadrap.wixsite.com/cartableetsparadrap/faire-un-don)" charity supporting school for children in Toulouse hospitals. Thanks :-)
Statistics
Likes
0
Downloads
2