CR-10 Smart Mod For K1 Max Magnetic Plate
Description
Since I have a K1 Max printer and the bed size is the same as the CR-10 Smart, I wanted to be able to swap the base plate between them. This can also be used just to convert from glass bed to magnetic plate. For this mod you will need: - K1 Max Magnetic Base; - K1 Max Magnetic Plate; - Printed Guide Parts. PRINTED PARTS I designed these two pieces to correctly guide the plate using the stock fixing. Printed on ABS with supports. MOD After applying the magnetic base, I used the bottom side to mark the holes and then open them on top with a scalpel. I drilled all the holes, to have access to tighten the screws when necessary or to disassemble the base for any reason. Mount the guides and that's it (don't forget to attach the wire to the left guide). Thank you.
Statistics
Likes
0
Downloads
0